Amer-networks MR16MI Manuel d'utilisateur télécharger pdf (Page 6)

Connecting to Power

1. This Converter is a plug-and-play device.

2. Connect the supplied AC to DC power adaptor

with a power voltage of 7.5Vdc/1.5Amp to the

receptacle on the rear panel of the converter, and

then attach the plug into a standard AC outlet

with a voltage range from 100 to 260 Vac.

Sliding Switch

There is a sliding switch for duplex mode setting for

fiber port. Refer to the table below for more details.

Switch 1 : On -> Fiber Half Duplex

Off -> Fiber Full Duplex

On Half Duplex Off

Full Duplex

(default)

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Amer-networks MR16MI Manuel d'utilisateur Page 6