Amer Networks SS2GD8IP Manuel d'utilisateur

Publication date:Dec., 2010 Revision B1 viii Caution Circuit devices are sensitive to static electricity, which can damage their delicate electroni

Publication date:Dec., 2010 Revision B1 88Parameter description: QCL#: QCL number : 1~8 QCE Type: Ethernet Type / VLAN ID / UDP/TCP Port / DSCP / To

Publication date: Dec., 2010 Revision B1 890x8847 MPLS, Mu

Publication date:Dec., 2010 Revision B1 903-7-3. Rate Limiters Function name: Rate Limit Configuration Function description: Each port includes an

Publication date: Dec., 2010 Revision B1 91 3-7-4. Storm C

Publication date:Dec., 2010 Revision B1 923-7-5. Wizard Function name: Wizard Function description: The QCL configuration Wizard is targeted on use

Publication date: Dec., 2010 Revision B1 93 Fig. 3-46 Set

Publication date:Dec., 2010 Revision B1 94 Fig. 3-48 Set up Port Policies Finish Fig. 3-49 Set up Typical Network Application Rules Fig. 3-50

Publication date: Dec., 2010 Revision B1 95 Fig. 3-51 Set

Publication date:Dec., 2010 Revision B1 96 Fig. 3-52 Set up Typical Network Application Rules Parameter description: QCL ID: QCL ID Range: 1~8 Tra

Publication date: Dec., 2010 Revision B1 97 Fig. 3-54 Set

Publication date: Dec., 2010 Revision B1 ix Warning: • Se

Publication date:Dec., 2010 Revision B1 98Parameter description: QCL #: QoS Control List (QCL): 1~8 Fig. 3-57 Set up TOS Precedence Mapping Param

Publication date: Dec., 2010 Revision B1 99 Fig. 3-59 Set

Publication date:Dec., 2010 Revision B1 100 Fig. 3-62 Set up VLAN Tag Priority Mapping Finish

Publication date: Dec., 2010 Revision B1 1013-8. SNMP Conf

Publication date:Dec., 2010 Revision B1 102 Function name: Communities Function description: This function is used to configure SNMPv3 communities.

Publication date: Dec., 2010 Revision B1 103Function name:

Publication date:Dec., 2010 Revision B1 104Function name: Groups Function description: This function is used to configure SNMPv3 group. The Entry i

Publication date: Dec., 2010 Revision B1 105Function name:

Publication date:Dec., 2010 Revision B1 106Function name: Accesses Function description: This function is used to configure SNMPv3 accesses. The En

Publication date: Dec., 2010 Revision B1 107 Function name

Publication date:Dec., 2010 Revision B1 108Port number. Default: 162 Community / Security Name: The length of “Community / Security Name” string is

Publication date: Dec., 2010 Revision B1 1093-9. ACL The S

Publication date:Dec., 2010 Revision B1 110Policy ID: Policy ID range:1~8 Action: Permit or Deny forwarding the met ACL packets Rate Limiter ID: Dis

Publication date: Dec., 2010 Revision B1 1113-9-2. Rate Li

Publication date:Dec., 2010 Revision B1 1123-9-3. Access Control List Function name: ACL Rate Limiter Configuration Function description: The switc

Publication date: Dec., 2010 Revision B1 113 Fig. 3-67 Ing

Publication date:Dec., 2010 Revision B1 114 Fig. 3-69 Frame Type Fig. 3-70

Publication date: Dec., 2010 Revision B1 115 Fig. 3-71

Publication date:Dec., 2010 Revision B1 116 Fig. 3-74 ARP Fig. 3-75 ARP Fig. 3-76 ARP Fig. 3-77 ARP

Publication date: Dec., 2010 Revision B1 117 Fig. 3-79 ARP

Publication date:Aug., 2010

Publication date:Dec., 2010 Revision B1 118 Fig. 3-82 ARP Fig. 3-83 ARP Fig. 3-84 ARP Fig. 3-85 ARP Fig. 3-86 ARP

Publication date: Dec., 2010 Revision B1 119 Fig. 3-87 ARP

Publication date:Dec., 2010 Revision B1 120 Fig. 3-89 IPv4 Fig. 3-90 IPv4 Fig. 3-91 IPv4 Fig. 3-92 IPv4 Fig. 3-93 IPv4

Publication date: Dec., 2010 Revision B1 121 Fig. 3-94 IPv

Publication date:Dec., 2010 Revision B1 122 Fig. 3-99 IPv4 Fig. 3-100 IPv4 Fig. 3-101 IPv4 Fig. 3-102 IPv4

Publication date: Dec., 2010 Revision B1 123 Fig. 3-103 IP

Publication date:Dec., 2010 Revision B1 124 Fig. 3-106 IPv4 Fig. 3-107 IPv4 Fig. 3-108 IPv4

Publication date: Dec., 2010 Revision B1 125 Fig. 3-109 IP

Publication date:Dec., 2010 Revision B1 126 Fig. 3-112 IPv4 Fig. 3-113 IPv4 Fig. 3-114 IPv4

Publication date: Dec., 2010 Revision B1 127 Fig. 3-115 IP

Publication date:Dec., 2010 Revision B1 21. Introduction 1-1. Overview of SS2GD8IP/IPH SS2GD8IP/IPH, a 8-Port GbE L2 Plus PoE Managed Switch with 2

Publication date:Dec., 2010 Revision B1 128 Fig. 3-118 Action Fig. 3-119 Rate Limiter

Publication date: Dec., 2010 Revision B1 129 Fig. 3-120 P

Publication date:Dec., 2010 Revision B1 130 Fig. 3-122 VLAN ID Filter Fig. 3-123 VLAN ID Filter Fig. 3-124 Tag Priority

Publication date: Dec., 2010 Revision B1 131Function name:

Publication date:Dec., 2010 Revision B1 132MAC Parameters: (When Frame Type = ARP) SMAC Filter: Range: Any / Specific Any: It is including all sourc

Publication date: Dec., 2010 Revision B1 133 Sender IP Fil

Publication date:Dec., 2010 Revision B1 134IP/Ethernet Length: Range: Any / 0 / 1 Any: Both 0 and 1 0: The ingress ARP/PARP frames where the Hardw

Publication date: Dec., 2010 Revision B1 135Any: Including

Publication date:Dec., 2010 Revision B1 136Range: Any / Specific Any: Including all of ICMP code values Specific: According to following ICMP code

Publication date: Dec., 2010 Revision B1 137ingress classi

Publication date: Dec., 2010 Revision B1 3The switch also

Publication date:Dec., 2010 Revision B1 138Range: Any / 0 / 1 Any: Including all TCP PSH case 0: The TCP control bit PSH is 0 1: The TCP control bi

Publication date: Dec., 2010 Revision B1 139Zero: Includin

Publication date:Dec., 2010 Revision B1 140Range: Any / Specific Any: Including all VLAN IDs Specific: According to following VLAN ID and Tag Prior

Publication date: Dec., 2010 Revision B1 1413-9-4. Wizard

Publication date:Dec., 2010 Revision B1 142 Fig. 3-126 Set up Policy Rules Fig. 3-127 Set up Policy Rules Fig. 3-128 Set up Policy Rules

Publication date: Dec., 2010 Revision B1 143 Fig. 3-129 Se

Publication date:Dec., 2010 Revision B1 144 Fig. 3-132 Set up Port Policies Fig. 3-133 Set up Port Policies Finish Fig. 3-134 Set up Typical Netw

Publication date: Dec., 2010 Revision B1 145 Fig. 3-135 S

Publication date:Dec., 2010 Revision B1 146 Fig. 3-138 Set up Typical Network Application Rules Finish Parameter description: Common Server: DHCP /

Publication date: Dec., 2010 Revision B1 1473-10. IP MAC B

Publication date:Dec., 2010 Revision B1 4member ports, and, in nature, avoid wasting the bandwidth while IP multicast packets are running over the n

Publication date:Dec., 2010 Revision B1 148Server/Client: The maximum number of IP-MAC binding client table is 512 entries. The maximum number of IP

Publication date: Dec., 2010 Revision B1 1493-11. 802.1X C

Publication date:Dec., 2010 Revision B1 150The overview of operation flow for the Fig. 3-53 is quite simple. When Supplicant PAE issues a request to

Publication date: Dec., 2010 Revision B1 151The Fig. 3-55

Publication date:Dec., 2010 Revision B1 15210. When the supplicant issue an EAP-Logoff message to Authentication server, the port you are using is

Publication date: Dec., 2010 Revision B1 1533-11-1. Server

Publication date:Dec., 2010 Revision B1 154Secret Key: The secret key between authentication server and authenticator. It is a string with the lengt

Publication date: Dec., 2010 Revision B1 1553-11-2. Port C

Publication date:Dec., 2010 Revision B1 156Advanced: Each clients under this port have to do 802.1X authentication by himself. Clientless: The cli

Publication date: Dec., 2010 Revision B1 157max. Request(1

Publication date: Dec., 2010 Revision B1 5policy can be ap

Publication date:Dec., 2010 Revision B1 1583-11-3. Status Function name: 802.1X Status Function description: Show the each port IEEE 802.1X authent

Publication date: Dec., 2010 Revision B1 159 3-11-4. Stati

Publication date:Dec., 2010 Revision B1 1603-12. TACACS+ TACACS+ (Terminal Access Controller Access-Control System Plus) is a protocol which provid

Publication date: Dec., 2010 Revision B1 161 3-12-2. Authe

Publication date:Dec., 2010 Revision B1 1623-12-3. Authorization Function name: Authorization Configuration Function description: The switch sup

Publication date: Dec., 2010 Revision B1 1633-12-4. Accoun

Publication date:Dec., 2010 Revision B1 1643-13. Trunking Configuration The Port Trunking Configuration is used to configure the settings of Link Ag

Publication date: Dec., 2010 Revision B1 165 Per Trunking

Publication date:Dec., 2010 Revision B1 166Method: This determines the method a port uses to aggregate with other ports. None: A port does not want

Publication date: Dec., 2010 Revision B1 167 3-13-2. Aggre

Publication date:Dec., 2010 Revision B1 61-2. Checklist Before you start installing the switch, verify that the package contains the following: ⎯

Publication date:Dec., 2010 Revision B1 1683-13-3. Aggregation Hash Mode Function name: Aggregation Hash Mode Configuration Function description:

Publication date: Dec., 2010 Revision B1 1693-13-4. LACP S

Publication date:Dec., 2010 Revision B1 1703-14. STP Configuration The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoid

Publication date: Dec., 2010 Revision B1 171Designated Pri

Publication date:Dec., 2010 Revision B1 1723-14-2. Configuration The STP, Spanning Tree Protocol, actually includes RSTP. In the Spanning Tree Conf

Publication date: Dec., 2010 Revision B1 173Max. Age: When

Publication date:Dec., 2010 Revision B1 1743-14-3. STP Port Configuration Function name: Port Function description: In the STP Port Setting, one

Publication date: Dec., 2010 Revision B1 175Configured Pat

Publication date:Dec., 2010 Revision B1 176M Check: Migration Check. It forces the port sending out an RSTP BPDU instead of a legacy STP BPDU at the

Publication date: Dec., 2010 Revision B1 177 3-15. MSTP Th

Publication date: Dec., 2010 Revision B1 7• Supports port

Publication date:Dec., 2010 Revision B1 178 3-15-2. Region Config Function name: MSTP Region Config Function description: To configure the basic id

Publication date: Dec., 2010 Revision B1 179 3-15-3. Insta

Publication date:Dec., 2010 Revision B1 180To delete an MSTI. Del All MSTI: Deleting all provisioned MSTIs at a time. Instance Configuration: Fig.

Publication date: Dec., 2010 Revision B1 181 Fig. 3-158 In

Publication date:Dec., 2010 Revision B1 182 Fig. 3-159 Port Config Parameter description: Port: 1- 8 Path Cost: 1 – 200,000,000 The same definition

Publication date: Dec., 2010 Revision B1 183Restricted Rol

Publication date:Dec., 2010 Revision B1 184 Parameter description: MSTP State: MSTP protocol is Enable or Disable. Force Version: It shows the curre

Publication date: Dec., 2010 Revision B1 185Mac Address of

Publication date:Dec., 2010 Revision B1 186particular spanning tree instance. Priority: Display port priority value for each port in a particular

Publication date: Dec., 2010 Revision B1 187 3-16. Mirrori

Publication date:Dec., 2010 Revision B1 8 1-4. Full View of SS2GD8IP/IPH 1-4-1. User Interfaces on the Front Panel (Button, LEDs and Plugs) Th

Publication date:Dec., 2010 Revision B1 188 3-17. Multicast The function, is used to establish the multicast groups to forward the multicast packet

Publication date: Dec., 2010 Revision B1 1893-17-2. IGMP P

Publication date:Dec., 2010 Revision B1 190To set the max response code value of the general query packet . (Available : 1~25 secs) Last Member Quer

Publication date: Dec., 2010 Revision B1 191 3-17-3. IGMP

Publication date:Dec., 2010 Revision B1 1923-17-4. IGMP Group Allow Function name: IGMP Group Allow Function description: The Group Allow function

Publication date: Dec., 2010 Revision B1 1933-17-5. IGMP G

Publication date:Dec., 2010 Revision B1 1943-17-6. MVR Function name: MVR configuration (Multicast VLAN Registration) Function description: Multi

Publication date: Dec., 2010 Revision B1 195 3-17-7. MVID

Publication date:Dec., 2010 Revision B1 196 3-17-8. MVR Group Allow Function name: MVR Group Allow Function description: The Group Allow function a

Publication date: Dec., 2010 Revision B1 197 3-17-9. MVR G

Publication date: Dec., 2010 Revision B1 9• LED Indicators

Publication date:Dec., 2010 Revision B1 198 3-18. Alarm Configuration 3-18-1. Events Function name: Events Configuration Function descript

Publication date: Dec., 2010 Revision B1 199Parameter desc

Publication date:Dec., 2010 Revision B1 2003-18-2. Email Function name: Email Configuration Function description: Alarm configuration is used to co

Publication date: Dec., 2010 Revision B1 201 3-19. DHCP S

Publication date:Dec., 2010 Revision B1 202 3-19-2. DHCP Snooping Entry Function name: DHCP Snooping Entry Function description: DHCP snooping Ent

Publication date: Dec., 2010 Revision B1 203* If the DHC

Publication date:Dec., 2010 Revision B1 2043-20. LLDP The switch supports the LLDP. For current information on your switch model, The Link Layer Di

Publication date: Dec., 2010 Revision B1 205reinitializing

Publication date:Dec., 2010 Revision B1 2063-20-2. LLDP Entry Function name: LLDP Entry Function description: The LLDP Entry function allows a swi

Publication date: Dec., 2010 Revision B1 207that are suppo

Publication date:Dec., 2010 Revision B1 101-5. View of the Optional Modules In the switch, Port 7~8 includes two types of media --- TP and SFP Fiber

Publication date:Dec., 2010 Revision B1 2083-20-3. LLDP Statistics Function name: LLDP Statistics Function description: Display the detailed count

Publication date: Dec., 2010 Revision B1 209Show the local

Publication date:Dec., 2010 Revision B1 2103-21. Save/Restore The switch supports three copies of configuration, including the default configuration

Publication date: Dec., 2010 Revision B1 2113-21-1. Factor

Publication date:Dec., 2010 Revision B1 212 Fig. 3-169 3-21-4. Restore User Function name: Restore User Configuration Function

Publication date: Dec., 2010 Revision B1 2133-22. Export/

Publication date:Dec., 2010 Revision B1 214 3-23. Diagnostics Three functions, including Diagnostics, Loopback Test and Ping Test are contained in t

Publication date: Dec., 2010 Revision B1 2153-23-2. Ping

Publication date:Dec., 2010 Revision B1 2163-24. Maintenance This chapter will introduce the reset and firmware upgrade function for the firmware up

Publication date: Dec., 2010 Revision B1 2173-25. Logout Y

Publication date: Dec., 2010 Revision B1 112. Installation

Publication date:Dec., 2010 Revision B1 2184. Operation of CLI Management 4-1. CLI Management Refer to Chapter 2 for basic installation. The fol

Publication date: Dec., 2010 Revision B1 219 Fig. 4-1

Publication date:Dec., 2010 Revision B1 220 4-2. Commands of CLI To see the commands of the mode, please input “?” after the prompt, then all comman

Publication date: Dec., 2010 Revision B1 221 4-2-1. Global

Publication date:Dec., 2010 Revision B1 222ones. Argument: None. Possible value: None. Example: SS2GD8IP# ip SS2GD8IP(ip)# help Commands available:

Publication date: Dec., 2010 Revision B1 223 6. trunk 7

Publication date:Dec., 2010 Revision B1 224reset to factory default. Argument: None. Possible value: None. Example: SS2GD8IP# restore default Rest

Publication date: Dec., 2010 Revision B1 225SS2GD8IP# save

Publication date:Dec., 2010 Revision B1 2264-2-2. Local Commands of CLI  802.1X set maxReq Syntax: set maxReq <port-range> <vlaue>

Publication date: Dec., 2010 Revision B1 227Possible value

Publication date:Dec., 2010 Revision B1 12• TP Port and Cable Installation ⇒ In the switch, TP port supports MDI/MDI-X auto-crossover, so both typ

Publication date:Dec., 2010 Revision B1 228<port range> : 1 to 8 <value> : 1-10, default is 2 Example: SS2GD8IP(802.1X)# set reAuthMax 2

Publication date: Dec., 2010 Revision B1 229

Publication date:Dec., 2010 Revision B1 230None Example: SS2GD8IP(802.1X)# show status Port Mode ====== ============ 1 Disable 2

Publication date: Dec., 2010 Revision B1 231show statistic

Publication date:Dec., 2010 Revision B1 232SS2GD8IP(account)# add aaaaa Password: Confirm Password: SS2GD8IP(account)# del Syntax: del <name&g

Publication date: Dec., 2010 Revision B1 233Example: SS2GD

Publication date:Dec., 2010 Revision B1 234None Example: SS2GD8IP(https)# show State : Enabled Redirect: Enabled SS2GD8IP(https)#  account ad

Publication date: Dec., 2010 Revision B1 235Possible value

Publication date:Dec., 2010 Revision B1 236tag_prio: any dmac: any frame type: arp arp type: Request/Reply (opcode): any source ip: any destination

Publication date: Dec., 2010 Revision B1 237action Syntax

Publication date: Dec., 2010 Revision B1 132-1-2. Installi

Publication date:Dec., 2010 Revision B1 238move Syntax: move <index1> <index2> Description: To move the ACE ( Access Control Entry) con

Publication date: Dec., 2010 Revision B1 239set Syntax:

Publication date:Dec., 2010 Revision B1 240------------ ------------ 1 1 2 1 3 1

Publication date: Dec., 2010 Revision B1 241Possible value

Publication date:Dec., 2010 Revision B1 242Email Address 4: Email Address 5: Email Address 6: <<events>> del all Syntax: del all &l

Publication date: Dec., 2010 Revision B1 243set all Synta

Publication date:Dec., 2010 Revision B1 244 Example: SS2GD8IP(alarm-events)# show Events Email Trap --------------------------

Publication date: Dec., 2010 Revision B1 245 autologout

Publication date:Dec., 2010 Revision B1 246 firmware Upgrade Syntax: upgrade <ip_address> <file_path> Description: To set up the i

Publication date: Dec., 2010 Revision B1 247Example: SS2GD

Publication date:Dec., 2010 Revision B1 14⎯ Gigabit Fiber with multi-mode LC SFP module ⎯ Gigabit Fiber with single-mode LC SFP module ⎯ Gigabit

Publication date:Dec., 2010 Revision B1 248Argument: <port>: port range, syntax 1,5-7, available from 1 to 8 <0>: set restricted normal

Publication date: Dec., 2010 Revision B1 249Possible value

Publication date:Dec., 2010 Revision B1 250group grpinfo Syntax: group grpinfo <vid> Description: To show the gvrp group. Argument: <vi

Publication date: Dec., 2010 Revision B1 251set erp Synta

Publication date:Dec., 2010 Revision B1 252Example: SS2GD8IP(igmp)# show igmpp  IP disable dhcp Syntax: disable dhcp Description: To disable

Publication date: Dec., 2010 Revision B1 253 set ip Synta

Publication date:Dec., 2010 Revision B1 254  ip_mac_binding set entry Syntax: set entry < 0 | 1> < mac> < ip> < port no>

Publication date: Dec., 2010 Revision B1 255SS2GD8IP(mac-t

Publication date:Dec., 2010 Revision B1 256Detection Port Locked Port Port Status Port Status

Publication date: Dec., 2010 Revision B1 257<#> :1 t

Publication date: Dec., 2010 Revision B1 15Sum up all elem

Publication date:Dec., 2010 Revision B1 258 LLDP <<set clear>> set Syntax: set clear Description: To set clear LLDP entry. Argu

Publication date: Dec., 2010 Revision B1 259SS2GD8IP(lldp)

Publication date:Dec., 2010 Revision B1 260 set txHold Syntax: set txHold <time> Description: To set lldp txHold Argument: <time>:

Publication date: Dec., 2010 Revision B1 261 LLDP Notific

Publication date:Dec., 2010 Revision B1 262Possible value: None Example: SS2GD8IP(lldp)# show local-device LLDP Local Devices Information Chassis T

Publication date: Dec., 2010 Revision B1 263 show port-co

Publication date:Dec., 2010 Revision B1 264- --- ------ ------ ------ -------- -------- ------- ----- 1 0 0 0

Publication date: Dec., 2010 Revision B1 265set Syntax:

Publication date:Dec., 2010 Revision B1 266Argument: none Possible value: none Example: SS2GD8IP(mac-mac-table)# flush SS2GD8IP(mac-mac-table)# sho

Publication date: Dec., 2010 Revision B1 267Age time: 300m

Publication date:Dec., 2010 Revision B1 161. The same VLAN members could not be in different switches. 2. Every VLAN members could not access VLAN

Publication date:Dec., 2010 Revision B1 268show Syntax: show Description: To display mac table maintenance Argument: Noneq Possible value: None E

Publication date: Dec., 2010 Revision B1 269 del Syntax:

Publication date:Dec., 2010 Revision B1 270  mirror set mirror Syntax: set mirror < #> Description: To set mirror port and enable/disable

Publication date: Dec., 2010 Revision B1 271<range>:

Publication date:Dec., 2010 Revision B1 272 mstp disable Syntax: disable Description: To disable mstp function. Argument: None Possible value

Publication date: Dec., 2010 Revision B1 273Argument: <

Publication date:Dec., 2010 Revision B1 274To set per port admin edge Argument: <port range> syntax: 1,5-7, available from 1 to 8 <admin e

Publication date: Dec., 2010 Revision B1 275<Instance P

Publication date:Dec., 2010 Revision B1 276 2 DISCARDING dsbl 2000000 128 2/2 V 3 DISCARDING dsbl 2000000 128 2/2 V

Publication date: Dec., 2010 Revision B1 277SS2GD8IP(mstp)

Publication date: Dec., 2010 Revision B1 172-1-4. Configur

Publication date:Dec., 2010 Revision B1 278SS2GD8IP(mstp)# show instance 0 mstp status : enabled force version : 2 instance id: 0 bridge max age : 2

Publication date: Dec., 2010 Revision B1 279show ports Sy

Publication date:Dec., 2010 Revision B1 280 multicast set mode Syntax: set mode <state> Description: To set igmp mode. Argument: <st

Publication date: Dec., 2010 Revision B1 281To add or edit

Publication date:Dec., 2010 Revision B1 282Description: To set mvr fast leave to disable. Argument: <port>: 1,5-9, available from 1 to 8. Pos

Publication date: Dec., 2010 Revision B1 283Possible value

Publication date:Dec., 2010 Revision B1 284SS2GD8IP(multicast)# set lmqi Syntax: set lmqi <time> Description: To set last member query

Publication date: Dec., 2010 Revision B1 285 Syntax: set

Publication date:Dec., 2010 Revision B1 286Last Member Query Max Response Time : 1 Router Ports: 3 allow address range: SS2GD8IP(multicast)# show

Publication date: Dec., 2010 Revision B1 287Description:

Publication date: Dec., 2010 Revision B1 i SS2GD8IP/IPH Us

Publication date:Dec., 2010 Revision B1 18Note: The switch’s serial port default settings are listed as follows: Baud rate 115

Publication date:Dec., 2010 Revision B1 288<state>: 0:Disable 1:Enable Possible value: <port> : 1,5-7, available from 1 to 8 <state&g

Publication date: Dec., 2010 Revision B1 289None Example:

Publication date:Dec., 2010 Revision B1 290Possible value: None Example: SS2GD8IP(policy)# add name Mary ip 192.168.3.1-192.168.3.4 action deny SS2G

Publication date: Dec., 2010 Revision B1 291SS2GD8IP(polic

Publication date:Dec., 2010 Revision B1 292<description> : max 47 characters Example: SS2GD8IP(port)# set description 3-8 salesdepartment SS2G

Publication date: Dec., 2010 Revision B1 293Argument: <

Publication date:Dec., 2010 Revision B1 294Argument: <port range> syntax : 1,5-7, available from 1 to 8 <value> : Allowed value are 151

Publication date: Dec., 2010 Revision B1 295 7 Up 1G/F

Publication date:Dec., 2010 Revision B1 296To display the display detail port counter. Argument: <port>: port, available from 1 to 8 Possible

Publication date: Dec., 2010 Revision B1 297Vendor OUI

Publication date: Dec., 2010 Revision B1 192-1-4-2. Config

Publication date:Dec., 2010 Revision B1 298 6 0 0 0 0 0 0 0 0 7 0 0 0 0 0

Publication date: Dec., 2010 Revision B1 299 4 Disable

Publication date:Dec., 2010 Revision B1 300<user priority>: 0 to 7 <queuing mode>: strict | weighted <low queue weighted>: 1 / 2 /

Publication date: Dec., 2010 Revision B1 301< tagpriori

Publication date:Dec., 2010 Revision B1 302SS2GD8IP(qos-qcl)# delete 2 1 <<rate>> set Syntax: set <range> <policer enable

Publication date: Dec., 2010 Revision B1 303Possible value

Publication date:Dec., 2010 Revision B1 304Argument: <status> : 1 means enable and 0 means disable <rate> : 1, 2, 4, 8, 16, 32, 64, 128,

Publication date: Dec., 2010 Revision B1 305 reboot rebo

Publication date:Dec., 2010 Revision B1 306 7 1 permit Disabled Disabled 0 8 1 permit Disabled Disabled

Publication date: Dec., 2010 Revision B1 307The function i

Publication date:Dec., 2010 Revision B1 202-1-5. IP Address Assignment For IP address configuration, there are three parameters needed to be filled

Publication date:Dec., 2010 Revision B1 308SS2GD8IP(snmp)# set group user1 3 group1 SS2GD8IP(snmp)# <<set view>> Syntax: set view &l

Publication date: Dec., 2010 Revision B1 309SS2GD8IP(snmp)

Publication date:Dec., 2010 Revision B1 310<Source IP> : SNMP access source ip <Source MASK> : SNMP access source address mask Possible

Publication date: Dec., 2010 Revision B1 311 Syntax: enab

Publication date:Dec., 2010 Revision B1 312Example: SS2GD8IP(stp)# set port 1-16 0 128 yes auto set version Syntax: set version <stp|rstp>

Publication date: Dec., 2010 Revision B1 313Port Port Stat

Publication date:Dec., 2010 Revision B1 314 enable Syntax: enable Description: To enable syslog function. Argument: <None> Possible value

Publication date: Dec., 2010 Revision B1 315 set device-na

Publication date:Dec., 2010 Revision B1 316Hardware-Mechanical Version : v1.01-v1.01 Serial Number : 030C02000003 Host IP Address

Publication date: Dec., 2010 Revision B1 3178 Mon Mar 17 1

Publication date: Dec., 2010 Revision B1 21 10 Cla

Publication date:Dec., 2010 Revision B1 318set ntp Syntax: set ntp <ip> <timezone> Description: To set up the current time via NTP serv

Publication date: Dec., 2010 Revision B1 319<port-range

Publication date:Dec., 2010 Revision B1 320Example: SS2GD8IP(trunk)# show aggtr-view Aggregator 1) Method: None Member Ports

Publication date: Dec., 2010 Revision B1 321 show status

Publication date:Dec., 2010 Revision B1 322Possible value: <vid>: 1 to 4094 Example: SS2GD8IP(vlan)# del tag-group 2 disable drop-untag Syn

Publication date: Dec., 2010 Revision B1 323enable sym-vla

Publication date:Dec., 2010 Revision B1 324set port-group Syntax: set port-group <name> <range> Description: To add or edit a port-base

Publication date: Dec., 2010 Revision B1 325set tag-group

Publication date:Dec., 2010 Revision B1 326Possible value: None. Example: SS2GD8IP(vlan)# show pvid Port PVID Rule1 Rule2 Port Rule U

Publication date: Dec., 2010 Revision B1 327Example: SS2GD

Publication date:Dec., 2010 Revision B1 22Not all IP address is available in the sub-netted network. Two special addresses are reserved. They are th

Publication date:Dec., 2010 Revision B1 328SS2GD8IP(tac-plus)# set telnet-authentication 0 1 Server connect! Set web-authentication Syntax: set w

Publication date: Dec., 2010 Revision B1 329Server connect

Publication date:Dec., 2010 Revision B1 3305. Maintenance 5-1. Resolving No Link Condition The possible causes for a no link LED status are as fol

Publication date: Dec., 2010 Revision B1 331 Appendix A Te

Publication date:Dec., 2010 Revision B1 332 Hardware Specifications  Standard Compliance: IEEE802.3/802.3ab / 802.3z / 802.3u / 802.3x  Netwo

Publication date: Dec., 2010 Revision B1 333 Ambient Temp

Publication date:Dec., 2010 Revision B1 334Appendix B Null Modem Cable Specifications The DB-9 cable is used for connecting a terminal or terminal

Publication date: Dec., 2010 Revision B1 23According to th

Publication date:Dec., 2010 Revision B1 242-2. Typical Applications The SS2GD8IP implements 8 Gigabit Ethernet TP ports with auto MDIX and two slot

Publication date: Dec., 2010 Revision B1 25 Fig. 2-1

Publication date:Dec., 2010 Revision B1 263. Operation of Web-based Management This chapter instructs you how to configure and manage the SS2GD8IP

Publication date: Dec., 2010 Revision B1 27To optimize the

Publication date:Dec., 2010 Revision B1 ii The information in this document is subject to change without notice. Unless the explicit written permi

Publication date:Dec., 2010 Revision B1 283-1. Web Management Home Overview After you login, the switch shows you the system information as Fig. 3-2

Publication date: Dec., 2010 Revision B1 29• The Informati

Publication date:Dec., 2010 Revision B1 30 PortMAC GVRPSystemVLANPoEQoSSNMPRoot ACLIP MAC Binding 802.1XTACACS+ TrunkSTPMSTPMirroringDHCP Snooping

Publication date: Dec., 2010 Revision B1 313-1-1. System I

Publication date:Dec., 2010 Revision B1 32hour, minute, second. Current time: Show the system time of the switch. Its format: day of week, month, d

Publication date: Dec., 2010 Revision B1 33 3-1-2. Account

Publication date:Dec., 2010 Revision B1 343-1-3. Time Configuration The switch provides manual and automatic ways to set the system time via NTP. Ma

Publication date: Dec., 2010 Revision B1 35 Default

Publication date:Dec., 2010 Revision B1 36Day Light Saving End : This is used to set when to stop performing the daylight saving time. Mth: Range i

Publication date: Dec., 2010 Revision B1 373-1-4. IP Confi

Publication date: Dec., 2010 Revision B1 iii DISCLAIMER. E

Publication date:Dec., 2010 Revision B1 38IP address: Users can configure the IP settings and fill in new values if users set the DHCP function “Dis

Publication date: Dec., 2010 Revision B1 39DNS: It is Doma

Publication date:Dec., 2010 Revision B1 403-1-5. Loop Detection The loop detection is used to detect the presence of traffic. When switch receives p

Publication date: Dec., 2010 Revision B1 413-1-6. Manageme

Publication date:Dec., 2010 Revision B1 42Function name: Management Security Configuration Function description: The switch offers Management Securi

Publication date: Dec., 2010 Revision B1 43Name: A name i

Publication date:Dec., 2010 Revision B1 443-1-7. Syslog The Syslog is a standard for logging program messages . It allows separation of the software

Publication date: Dec., 2010 Revision B1 453-1-8. System L

Publication date:Dec., 2010 Revision B1 463-1-9. Virtual Stack Function name: Virtual Stack Function description: Virtual Stack Management(VSM) is

Publication date: Dec., 2010 Revision B1 47Parameter descr

Publication date:Dec., 2010 Revision B1 iv Table of Contents CAUTION ...

Publication date:Dec., 2010 Revision B1 483-2. Port Configuration Four functions, including Port Status, Port Configuration, Simple Counter and Deta

Publication date: Dec., 2010 Revision B1 49Parameter descr

Publication date:Dec., 2010 Revision B1 50 3-2-2.Port Status The function Port Status gathers the information of all ports’ current status and repor

Publication date: Dec., 2010 Revision B1 51supported is ha

Publication date:Dec., 2010 Revision B1 52Parameter description of Port 7 ~ Port 8: Connector Type: Display the connector type, for instance, UTP,

Publication date: Dec., 2010 Revision B1 533-2-3. Simple C

Publication date:Dec., 2010 Revision B1 54Errors: Transmit:: Number of bad packets transmitted. Receive: Number of bad packets received. Drops Trans

Publication date: Dec., 2010 Revision B1 553-2-4. Detail C

Publication date:Dec., 2010 Revision B1 56Rx Broadcast: Show the counting number of the received broadcast packet. Rx Multicast: Show the counting n

Publication date: Dec., 2010 Revision B1 57Number of 256 ~

Publication date: Dec., 2010 Revision B1 v3-3-6. Managemen

Publication date:Dec., 2010 Revision B1 583-2-5. Power Saving The function of Power Saving and provides the Power saving for reduce the power consum

Publication date: Dec., 2010 Revision B1 593-3. VLAN The

Publication date:Dec., 2010 Revision B1 603-3-2. Tag-based Group Function name: Tag-based Group Configuration Function description: It shows the

Publication date: Dec., 2010 Revision B1 61Member Port:

Publication date:Dec., 2010 Revision B1 62 Fig. 3-20-1 c. You need to assign these ports for member of port isolation. Fig. 3-20-2 d. Press th

Publication date: Dec., 2010 Revision B1 633-3-3. Port-bas

Publication date:Dec., 2010 Revision B1 64Delete Group: Just press the <Delete> button to remove the selected group entry from the Port-based

Publication date: Dec., 2010 Revision B1 653-3-4. Ports F

Publication date:Dec., 2010 Revision B1 66Role: This is an egress rule of the port. Here you can choose Access, Trunk or Hybrid. Trunk means the ou

Publication date: Dec., 2010 Revision B1 673-3-5. Port Iso

Publication date:Dec., 2010 Revision B1 vi3-17-5. IGMP Group Membership...

Publication date:Dec., 2010 Revision B1 683-3-6. Management VLAN Function name: Management VLAN Function description: To assign a specific VLAN for

Publication date: Dec., 2010 Revision B1 693-4. MAC MAC Ta

Publication date:Dec., 2010 Revision B1 70Disable automatic aging: Stop the MAC table aging timer, the learned MAC address will not age out automati

Publication date: Dec., 2010 Revision B1 713-4-2. Static F

Publication date:Dec., 2010 Revision B1 723-4-3. Static Forward Function Name: Static Forward Function Description: Static Forward is a function th

Publication date: Dec., 2010 Revision B1 733-4-4. MAC Alia

Publication date:Dec., 2010 Revision B1 743-4-5. MAC Table Function name: MAC Table Function Description: Display the static or dynamic learning M

Publication date: Dec., 2010 Revision B1 753-5. PoE Funct

Publication date:Dec., 2010 Revision B1 76The current is supplied to the PD by the port. PD Class: The Class of the PD linked to the port of the swi

Publication date: Dec., 2010 Revision B1 77 3-6. GVRP GVRP

Publication date: Dec., 2010 Revision B1 vii Revision His

Publication date:Dec., 2010 Revision B1 78take effect immediately. Join Time: Used to declare the Join Time in unit of centisecond. Valid time range

Publication date: Dec., 2010 Revision B1 79Disabled: In t

Publication date:Dec., 2010 Revision B1 80 3-6-2. Counter Function name: GVRP Counter Function description: All GVRP counters are mainly divided in

Publication date: Dec., 2010 Revision B1 81Empty Message P

Publication date:Dec., 2010 Revision B1 823-6-3. Group Function name: GVRP Group VLAN Information Function description: To show the dynamic group m

Publication date: Dec., 2010 Revision B1 833-7. QoS(Qualit

Publication date:Dec., 2010 Revision B1 84Parameter description: Number of Classes: 1 / 2 / 4 Port: User can choose the port (1~8) respectively wit

Publication date: Dec., 2010 Revision B1 853-7-2. Qos Cont

Publication date:Dec., 2010 Revision B1 86 Fig. 3-36 Fig. 3-37 Fig. 3-38 Fig. 3-39

Publication date: Dec., 2010 Revision B1 87 Fig. 3-40 Fig