Amer Networks SS2GD8I Guide de l'utilisateur télécharger pdf (Page 10)

LINK/ACT: Lights up green when connected to a device, flashes when transmitting data.

10/100/1000Mbps: Lights up green when connected at 1000Mbps, amber when connected at 100Mbps,

and is off when connected at 10Mbps or not connected.

SFP: Lights up green when connected to a device, blinks when transmitting data.

1.5.2 Rear Panel

The RS-232 port used for command line management and the power outlet are on the rear of the unit.

Figure 1-3: Rear Panel

1.6 Fiber Transceivers

Ports 7 and 8 on the switch are combo ports which support two types of media, copper Ethernet cable

(recommended Cat 5e or higher) and fiber using an SFP (mini-GBIC) transceiver. These ports can only

support one type of connection at a time. The switch supports most types of SFP transceivers including:

• 1000Mbps LC, multi-mode, SFP Fiber transceiver

• 1000Mbps LC, single mode, 10km, SFP Fiber transceiver

• 1000Mbps LC, single mode, 30km, SFP Fiber transceiver

• 1000Mbps LC, single mode, 50km, SFP Fiber transceiver

• 1000Mbps BiDi LC, single mode, 20km, 1550nm SFP Fiber WDM transceiver

• 1000Mbps BiDi LC, single mode, 20km, 1310nm SFP Fiber WDM transceiver

Figure 1-4: 1000Base-SX/LX LC SFP Fiber Transceiver

Figure 1-5: 1000Base-LX BiDi LC SFP Fiber Transceiver

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 133 134

Pas de commentaire

Amer Networks SS2GD8I Guide de l'utilisateur Page 10